Smarty Cummins DPF Delete Kits

Smarty Tuner WITH ME file installed
DPF Kits sold Below
2007-2009 Dodge Cummins 6.7L

	EGR/Cooler Delete		Order
Smarty DPF Tuner $685.00 Part # S-67ME 2007-2009 6.7L Dodge Cummins	2007.5-2008 6.7L $92.00 2009 6.7L $135.00

The Smarty Tuner is our most recommended tuner for the Dodge Cummins diesel. When it comes to deleting your DPF on the 6.7L Dodge, you will be hard pressed to find anything superior to the Smarty tuner from Mads Electronics. Our Smarty tuner comes preloaded with the middle eastern tune that you need to delete your DPF. Below we offer combo packages that give you the best bang for your buck to delete your DPF. Choose a DPF combo with a Smarty tuner, exhaust system, or delete pipe below. We can get many possible combinations of DPF delete kits. Choose from stainless steel, aluminized, 4 or 5 inch exhaust, do you want a optional EGR/cooler delete kit, and then what name brand exhaust or pipe do I go with? It sure can be overwhelming, that is why you need to call the pros at 866-737-4966. The Smarty DPF kits we sale regularly and can give you free advice from our experiences on which kit would be best for you and your Dodge Cummins diesel.

NOTE: If the shrink wrap is broken there can not be a return on this product. This is a policy of Mads Smarty tuners.

NOTE: When deleting the DPF with a Smarty tuner, the Smarty must be installed 1st on the truck!!!

How to update your Smarty Tuner (PDF file)

This product is for Middle East, East Europe, South America and Africa markets ONLY, where the emissions regulations do not require the DPF and NOx adsorber technology.

	EGR/Cooler Delete		Order
Smarty DPF Tuner $685.00 Part # S-67ME 2007-2009 6.7L Dodge Cummins	2007.5-2008 6.7L $92.00 2009 6.7L $135.00

Fast guide to Smarty’s special Features:

Ability to delete the EGR / DPF code free
NOTE: When deleting the DPF with a Smarty tuner, the Smarty must be installed 1st on the truck!!!
Late injection events (4th inj) disabled
No exhaust thermocouples simulators required
CaTCHER software's inside
Ten different performance levels
Fastest download in the industry, up to three times faster than the competition, a typical ECM update takes about 5 minutes
ABS tire height updates in just few seconds
Manual High Idle is enabled in all softwares
Reads Diagnostic Trouble Codes in plain text
No tools required, no fuses to pull
USB built in for simple updates
Free internet updates
Most complete keyboard in the industry
Reliable, it works off your OEM hardware
Programmable Speed Limiter from 25 to 250 mph
Programmable parameters for fine tuning
Power on Demand

*** Unlike the Smarty S06 for the 5.9L, the Smarty S67ME is not untraceable

Fast guide to Smarty's software levels

The horsepower settings. except #0, all other softwares have a modified "Torque management" ( TQM ). The throttle response
is greatly improved but is set to a save limit. With "Save" I mean save for your tranny and rest of the driveline.

SW # 0 : Half power
SW # 1 : 30 Hp increase, with added timing
SW # 2 : 60 Hp increase, no added timing ***
SW # 3 : 60 Hp increase, with added timing
SW # 4 : 90 Hp increase, no added timing ***
SW # 5 : 90 Hp increase, with added timing
SW # 6 : 130 Hp increase, no added timing ***
SW # 7 : 130 Hp increase, with added timing
SW # 8 : 170 Hp increase, no added timing *** °°°
SW # 9 : 170 Hp increase, with added timing °°°

°°° Do not use for prolonged high speed runs! Speeds exceeding approx 105 mph can result in high exhaust gas temperatures and damage the Diesel Particulate Filter (DPF) !!!
*** All even numbered softwares (2-4-6-8) without timing are to be used for stacking with other after market power adding devices that also add their own timing. NO additional timing has to be used with the odd numbered softwares (1-3-5-7-9).
Severe engine damage will result !!!

Tested on stock trucks on our in house Dyno Dinamics Twin Retarder Dyno
. Stock means just that. Stock! Even the air filters were stock...

We checked the "baseline" ( the stock truck Hp at the rear wheels ) twice in a day in order to be sure about our findings. The above declared HP numbers are all rounded down to the closest number. For example the 90 Hp file actually did 96 Hp. That's a 90 Hp software for me, not a 100. The 170 Hp was 176.

ABS / Speedo recalibration
The tire height can be adjusted up to 44" in increments of 10 tenth of an inch in just a couple seconds. Of course, Smarty needs to be VIN# locked to the truck in order to get into the ABS adjustment section.

DTC Code reader
The name says it all. You can read and erase codes. Codes are displayed also in plain English. That's old news by now. Smarty S-03 was the first one to provide that utility, others found the idea to be a good one too. ( Smarty does erase ABS codes too but does not display them )

ECM update speed
Faster than anything else on the market! Again we've done our homework on the protocol. Less than 5 minutes. Three times faster than a Star-Scan diagnostic tool or competitor. We have developed our own bootloader in order to not have to pull fuses should an update become interrupted for any reason. All you have to do is to turn the key off / key on Smarty does everything else on it's own.

Updates
The CaTCHER softwares as they are today are only a starting point. Expect major news in future. We’re for your feedback, opinions, likes, dislikes... We will make Smarty do what YOU want, TOGETHER.

	EGR/Cooler Delete		Order
Smarty DPF Tuner $685.00 Part # S-67ME 2007-2009 6.7L Dodge Cummins	2007.5-2008 6.7L $92.00 2009 6.7L $135.00

Sitemap

Smarty Cummins DPF Delete Kits

Smarty Tuner WITH ME file installed DPF Kits sold Below 2007-2009 Dodge Cummins 6.7L

Smarty Tuner WITH ME file installed
DPF Kits sold Below
2007-2009 Dodge Cummins 6.7L